IntelliBrite
®
5g White Pool Light and White Spa Light Installation and User’s Guide
Replacing the IntelliBrite White Spa Light Face ring and
Gasket (P/N 640045) or Gasket and Lens (640046) see page 21
1.
Turn off main electrical switch or circuit breaker
, as well as the switch
which operates the IntelliBrite underwater light itself.
2.
REMOVING THE INTELLIBRITE WHITE SPA LIGHT:
Remove the pilot
screw at top of face ring, remove the light assembly from the niche. Place
the assembly on the deck.
Note:
It is not necessary to drain down the pool.
Be sure to keep the pilot screw from the IntelliBrite
underwater light. This screw mounts and electrically grounds the
housing securely to the mounting ring and wet niche. Failure to use the screw
provided could create an electrical hazard which could result in death or serious
injury to pool users, installers or others due to electrical shock.
D A N G E R !
RISK OF ELECTRICAL SHOCK OR ELECTROCUTION
Always disconnect power to the pool light at the circuit breaker
before servicing the light. Failure to do so could result in death
or serious injury to installer, pool professional, pool users, or
others due to electrical shock.
Note: When replacing an IntelliBrite White Spa light assembly, a new spa
light assembly includes a light engine, lens, gasket and face ring (for part
light assembly part numbers, see page 21 ).
Always install a new lens gasket (see page 21 for kit part
numbers) whenever disassembling the IntelliBrite light assembly.
Failure to do so may permit water to leak into the assembly which could cause:
(a)
an electrical hazard resulting in death or serious injury to pool users, installers, or
others due to electrical shock, or
(b)
breakage of the lens, which likewise could
result in serious injury to pool users, installers, or bystanders, or in damage to
property.
17
Pilot screw (bronze)
IntelliBrite White Spa Light
