4
E-03-601 (02-15-22)
SAFETY SYMBOLS
This is the safety alert symbol. When you see this symbol on
your pump or in this manual, look for one of the following signal
words and be alert to the potential for personal injury:
warns about hazards that will cause serious
personal injury, death or major property damage if ignored.
warns about hazards that can cause serious
personal injury, death or major property damage if ignored.
warns about hazards that will or can cause minor
personal injury or property damage if ignored.
The word
NOTICE
indicates special instructions that are
important but not related to hazards.
CALIFORNIA PROPOSITION 65 WARNING
This product and related accessories contain
chemicals known to the State of California to cause cancer,
birth defects or other reproductive harm.
BEFORE INSTALLATION:
This manual contains important safety information regarding
the use of this product. This product should only be installed
and serviced by a qualified professional. Carefully read and
follow all safety instructions in this manual and on the unit itself
before installing or operating pump. Keep this manual for future
reference.
Follow all state and local codes regarding the installation and
use of this pump.
GENERAL SAFETY
Do not touch a pump while in operation as
they can operate at high temperatures. To avoid burns when
servicing the pump, shut off, allow it to cool for 30 minutes
after shutdown before handling.
Follow all applicable local and state codes and regulations.
Keep safety labels in good condition, replacing any missing
or damaged labels.
Submersible pumps are not approved for and should not be
used in swimming pools, recreational water installations,
decorative fountains or any installation where human
contact with the pump fluid is common. Pump is designed
for municipal and commercial wastewater applications.
DO NOT
run the pump dry. Dry running can overheat the
pump, (causing burns to anyone handling it) and will void the
warranty.
The pump is permanently lubricated. No oiling or greasing is
required in normal operation.
Periodically inspect pump and system components.
Wear safety glasses at all times when working on pumps.
Keep work area clean, uncluttered and properly lighted.
Store all unused tools and equipment.
DO NOT
use to pump flammable liquids.
SAFETY INFORMATION
Содержание HPS4HDX
Страница 3: ...3 E 03 601 02 15 22 PAGE INTENTIONALLY LEFT BLANK ...
Страница 17: ...17 E 03 601 02 15 22 WIRINGDIAGRAMS ...
Страница 18: ...18 E 03 601 02 15 22 WIRINGDIAGRAMS ...