Setup
8
Charge the scanner's battery
This scanner has a built-in battery, which needs to charging
before using for the first time.
1. Turn on your computer and turn off the scanner.
2. Connect the scanner via USB cable to your computer's USB port
or to a powered USB hub.
3. Scanner will draw the power directly from PC or USB hub.
4. After charged up, unplug the scanner and then you are ready to
scan.
Notes:
Scanner is charged over USB only and takes around 2.5 hours to
be fully charged.
8
Calibrate the scanner
Scanner occasionally needs calibration to perform at its best.
If the scans are showing lines or black dots, please calibrate your
scanner.
Please turn on the scanner and insert the calibration sheet
(provided by Penpower) to start automatic calibration.
