Chapter 1 Product Overview
1-3
Presenter mode:
In the Presenter mode, the left button acts as the page up function to
show the previous page.
3. Right button:
Handwriting mode:
It provides 7
Frequently Used punctuation symbols such as
,。
、:;?!
. When press the right button, the system will input the first symbol. Press
again, replace to the next symbol and so on.
Presenter mode:
In the Presenter mode, the right button acts as the page down function
to show the next page.
4. Laser point button: Press the laser point button to highlight the main points in your pre-
sentation with the red laser light.
5. LCD monitor: Press the timer setting button (See item 11) after 5 seconds, the LCD
monitor will display the left time and alarm you at 2, 5 minutes left and time is up with
the gentle red flash.
6. Writing/Mouse area:
Handwriting Mode:
Writing in this area.
Presenter mode:
When pull the
stylus out, you can use this area as a mouse pad.
7. Laser light: When press the laser point button (See item 4), it will turn this red laser light
on.
8. ID matching button: If there is more than two Presenter Pens or wireless devices around
you and interference your writing or presentation, you may push ID matching button to
match your Presenter Pen and your wireless receiver. Please refer to 2.7 ID Code Match-
ing for details.
9. Battery cover: Push the wedge of the battery cover upward to open the battery cover, and
put an AAA battery in with the positive electrode in the right side. When the electric
power is insufficient, the LCD monitor will display “Lo” in the timer screen to remind
you to replace the battery.
10. Stylus pen: Pull the stylus out to write or use it as a mouse. Place it back, when you do
not need to use the stylus.
11. Timer setting button: Let you set the presentation time. Press it once, add 5 minutes and
so on. The remaining time will display on the LCD monitor. (See item 5)
Tip: Press and hold the [Timer setting button] for a while, you can reset the timer.