PEmicro Cyclone MAX, Руководство пользователя

Страница: 41 / 95

Cyclone MAX User Manual 35
CYCLONE MAX
into the Cyclone MAX. The Cyclone MAX will then be ready for operations.
Figure 4-12: Image Management And Transfer Dialog
The Interface drop-down list allows the user to select either a serial, USB, or
Ethernet communication interface. The Port drop-down list allows the user to
select from one of the Cyclones available on that interface. In the case of a
Cyclone present on a different network (i.e., not displayed automatically in the
Port drop-down list), the user may specify its IP address by using the Specify
IP button.
“Store Image to Cyclone” will then store the image on the selected Cyclone.
4.1.8 Save Image/Cyclone Configuration
“Store Image To Disk” allows the current configuration to be saved onto the
hard drive. The image can then be transferred to the Cyclone MAX via the
Manage Images Utility.
“Save Cyclone Configuration,” in the file menu, allows the user to save the
configuration into a file, which may be used for future reference, e.g.,
comparing the Cyclone MAX contents with the file to see if they are the same.
4.2 Configuration Via LCD Menu
The following section describes configuration of the Cyclone MAX using the
LCD menus.
Figure 4-13 shows an overview of the menu structure.