P/N 522BABYHRBracket Mounting Instructions REV20190107_web 2
Thank you for purchasing this Health o meter
®
Professional product. Please read these instructions
carefully and keep it for easy reference or training.
Notes:
- If mounting the height rod onto a scale with the weighing tray already attached start at step 1.
- If mounting the height rod on a brand new scale, do not attach the weighing tray during
scale assembly. Begin height rod mounting at step 2 below.
-
Ensure that the scale is off during the height rod mounting process. If the scale was powered
on during the process, be sure to turn the scale off and power on again before weighing the
first patient.
-
If the height rod needs to be removed, ensure the scale is off before removal and off before
replacing the height rod onto the scale.
1.
Remove the screw cover caps on the
weighing tray. Next, using a screwdriver,
remove the two screws to detach the
weighing tray from the scale platform. Retain
the screws and caps for use in step 3.
2.
Obtain the mounting bracket and align the
holes in the bracket with the holes in the
scale platform, as shown.
3.
Obtain the weighing tray and align the holes
in the tray with the holes in the platform and
mounting bracket. Obtain the two weighing
tray screws included with your scale or that
were removed in step 1. Insert the screws
through the weighing tray and mounting
bracket and into the scale platform. Using a
screwdriver, attach the weighing tray to the
scale platform. Obtain the screw cover caps
included with your scale or removed in step 1.
Replace the caps over the screws on the tray.
4.
Obtain the silver support rod from the
packaging. Lay the support rod on a flat
surface with the side with four holes facing
up. Place the end with the most holes on the
left side.
A
B
C
D
