Setting the AUTO-ON TIMER(cont'd)
TURN
THE UNIT"OFF" USING THE I/O SWITCH.
AUTO-ON
"off"
TIMER-ON
AUTO-ON
TIMER-ON
ON
AUTO-ON
AUTO-TIMED
AUTO-TIMED
CLOCK
AUTO TIMER-
ON
ON
(TIMER ON)
IMPORTANT: The desired AUTO-ON time must
be registered within a 5 second period (after
pressing the TIMER-ON key pad) otherwise the
selected time will mot register and the system
will automatically revert back to the regular
"time of day" clock setting. If this occurs, you
must repeat step 7 again.
AUTO-ON
"TIMER ON"
AUTO-
TIMED
AUTO-ON
"TIMER
ON"
AUTO-ON
TIMER-ON
5) All of the settings are now registered.
6) To set the
timer, the unit must be
turned to the
position (non-operational).
7) Press the
key pad to initiate the
time sequence. Fig. 32. The display
window will indicate
and the word
will flash for 5 seconds. Press the
or
key
to select the desired
start time.
Fig.32a.
Key pad will decrease the
Setting in 10 minute increments.
Keypad will increase the
Setting in 10 minute increments.
When the desired time is established,(the time
will flash in the display window) press the
key pad to register the
program. The word
will stop flashing and
remain "on"
indicating the program
is set. The time of day clock setting will
immediately revert back in the display window.
The unit will start automatically when the specified
time is achieved on the time of day clock
(the
prompt will disappear from the
display window). To cancel or override the
program,simply turn on the unit before the
time is scheduled to operate (the
prompt will disappear from the display window)
You can varify the
time selection anytime
(prior to the program starting )by pressing the
key pad. The time you selected will
appear(flash)temporarily(replacing the time of day)
for approximately 5 seconds.
14
Fig. 32
Fig. 32a
SWING
SWING
OFF
OFF
ON
ON
MODE
MODE
TIMER
TIMER
FAN
FAN
I/O
I/O
CLOCK
CLOCK
12:00
12:00
ON
ON
TIMER
TIMER
