Pelltech PV 100a, Руководство пользователя

Страница: 26 / 34

PV 100a
temperature
48 AUTO CLEANING Cleaning is turned ON or not ON ON/OFF
50 ON ERROR RELAY Error output relay contacts (ON -
NO or OFF -NC)
ON ON/OFF
99 MODEL VERSION Load default settings for chosen
burner model or change model
type
0 100a 20a/30a/50a/
100a
Refilling fuel
The fuel storage must be refilled before it runs empty. Fuel can be added at any time during the
operation. To add fuel, simply pour a new bag of pellets into your fuel storage.
If the storage runs empty before new fuel is added, the external auger must be loaded again as
described in chapter Starting. Failing to do so will result ‘Fuel error’ due to fuel loading timeout.
Maintenance
Pellet burner PV 100a requires systematic maintenance. The maintenance period depends on the
quality of the pellets and heating intensity. The average maintenance period is between 1 to 2
months. Allthough the burner has an automatical cleaning system, some ash collects on the grates
and under the grates.
Depending on the quality of the pellets, the maintenance period my vary.
To clean the burner:
1. Turn off the burner by turning the thermostat to 0.
2. Let the burner cool down for at least 1 hour.
3. Open the boiler's door to gain access to burning chamber
4. Remove carefully the cover stones from burning chamber.
5. Remove ash from the grates.
6. Remove the grates, make sure that all holes on the plate are clean.
7. Remove all residues collected under the grates.
8. Place back all removed burner parts.
9. Close the boiler's door to finish the maintenance and turn the thermostat to desired
temperature.
NB! Check the boiler manual for boiler cleaning.
26