Pelltech PV 100a, Руководство пользователя

Страница: 24 / 34

PV 100a
the burner. The external auger has stopped, the internal feeder and fan are still
working until all fuel is burned.
END BLOW When photocell doesn`t see any flame only the fan keeps on working with
minimum speed in order to make sure there is no fuel in burner.
NO PELLETS Level sensor does not detect pellets
NO FLAME There is no flame in the burner more than 120 seconds during burning.
OVERHEAT Temperature in the burner has reached preset temperature and burner turned off.
IGN.ERROR Flame is not recognized after ignition
LEVEL ERR Level dose not reached or level dose not disappear at burning time
FEEDER ERR Jam in feeder or feeder rotation is not detected
FAN ERROR Fan rotation problem
GRATE ERROR Grate is stucked.
BATTERY LOW Battery is not connected or empty
NO POWER Supply power is not detected – burner works on battery
Settings
To enter settings menu, press OK. To go back to log screen, press “ESC”.
Table 5 Main menu
Men
u nr
Menu
parameter ENG
Description Default
value
Selection list
1 STATUS-> Submenu for status information * 1
2 INFO-> Information from burner devices * 2
3 BURNER Turn burner ON/OFF OFF ON/OFF
4 HOLD FLAME Flame holding allowed * 3 OFF ON/OFF/AUTO
5 PELLETS Select fuel quality NORMAL NORMAL/LIGHT/HEAVY
6 POWER Actual power level AUTO AUTO/50/60/70/80/90/100
7 BASE AIR Fan speed correction for all fan
speeds 0 -2/-1/0/+1/+2/+3/+4/+5
8 LANGUAGE Language selection * 4 ENG See language list
9 PARAMETERS -> Parameter setup menu
*1 – see “Status menu description”
*2 – see “Info menu description”
*3 – see “HOLD FLAME” status description
*4 – see “Languages” chapter
24