pellenc AIRION BP, Перевод оригинального руководства

Страница: 41 / 56

BACKPACK BLOWER AIRION BP
57_148610-A
Symptoms
State of the on/off switch of the battery
HMI screen
Probable cause
Checks
Solutions
Repairer
The trigger or the selector does not
work anymore
Authorised PEL- LENC distributor
Change the trigger or the selector or the HMI card
Authorised PEL- LENC distributor
On
Rotor blade blocked
Check for the presence or absence of a foreign bodies that could block the rotor blade (vege- tation, wire, stick, etc.)
Free up the rotor blade
Authorised PEL- LENC distributor
The power
cord is severed
Check the con- dition of the cord
Change the cord
Authorised PEL- LENC distributor
The HMI cord is severed
Check the con- dition of the cord
Change the cord
Authorised PEL- LENC distributor
When stopped, check the battery charge level
Recharge the bat- tery (if less than
10% charged)
User
The battery is flat
Check that the bat-
tery is not com- pletely discharged
Recharge the battery
User
HMI pictograms
Let the tool cool down for rough-
ly 5 minutes
User
The tool stops
during use
On
O
ff
The tool has reached its temperature limit
Battery screen message
Allow the bat-
tery to cool down
User
The tool works, Boost is tem-
porarily un- available
On
On and fault mes- sage displayed
The tool is hot.
Cooling mode in operation
Check the condition of the air intake screen
Clean the air intake screen
Allow the tool to cool down
User
41