pellenc AIRION BP, Перевод оригинального руководства

Страница: 38 / 56

BACKPACK BLOWER AIRION BP
57_148610-A
6. SERVICING
Caution
Before any intervention, check that the tool is switched off. Refer to Section 5.1.2, “Stopping
the tool”.
6.1. CLEANING THE TOOL
Warning
Never use solvents (trichloroethylene, white spirit, petrol, etc.) to clean the tool.
Keep your tool clean by wiping it regularly with a soft, damp cloth. Using an air compressor (10 bars maximum),
blow on the tool, the air intake screen and the rotor blade on a regular basis to limit clogging.
Check that the whole air duct (from the intake to the out-
let) is not obstructed.
Ensure that air intake screen holes are not obstructed.
Replace the air intake screen in case of damage, even
if it is partial.
Check the condition of the rotor. If a replacement is nec-
essary, contact your authorised PELLENC distributor.
6.2. MAINTENANCE FREQUENCY
At each
start-up
After
each use
If necessary Every 500
hours or
every year
if necessary
Cleaning the machine X
Visual inspection of the tool X
Check for clogging of the air intake screen and
clean if necessary
X X
Check the rotor:
• clean if necessary
• replace if necessary from an authorised PEL-
LENC distributor
X
Checking the battery charge level X
Replace the safety labels X
Have the tool inspected by an approved PEL-
LENC distributor
X
38