Pelgrim PWD112WIT, Подробные инструкции

Страница: 30 / 48

30
287730
Start delay
Use this function to start the drying cycle after a certain amount of
time has elapsed.
Delay time can be set to up to five hours in 30-minute steps and
up to 24 hours in 1-hour steps.
The function is activated when the START/PAUSE key is pressed.
Time is counted down by minutes. When the countdown reaches
zero, the selected drying program will start automatically.
To interrupt or change the program delay time press the START/
PAUSE key. Press the (3) key to select a new delay time. To
confirm the new setting, press the START/PAUSE key.
To quickly cancel the delayed start setting, press the (3) key and
hold it for 3 seconds.
In case of a power supply failure before the delay time has elapsed,
press the START/PAUSE key to resume the countdown.
3
Some functions cannot be selected with some programs; an
acoustic signal and a flashing light will remind you of such
cases (see Program Table).
3 3 3
4