Pelgrim PWD112WIT, Подробные инструкции

Страница: 32 / 48

32
287730
5. STEP: PROGRAM START-UP
Press the START/PAUSE key.
Start delay time (if selected), or the time remaining until the end
of the program and counting down will be indicated on the display
unit.
Signal lights next to the selected functions will be lit.
6. STEP: END OF DRYING CYCLE
An acoustic signal will indicate the end of the drying cycle. Signal
lights will light up and the light on the START/PAUSE key will flash.
1. Open the dryer door.
2. Clean the filters (see section Cleaning ...).
3. Take the laundry from the drum.
4. Close the door.
5. Switch off the appliance (rotate the program selector dial to
the "OFF" position).
6. Empty the condensate tank.
7. Unplug the power cord from the outlet.
Drying time indicated is based on tests according to the
EN 61121 standard and it may change in steps during the
drying process, depending on the load and initial moisture of
thelaundry.