Pelgrim PFI8160WIT, Инструкция по эксплуатации

Страница: 63 / 68

EN 31
INSTALLATION
General
This appliance should only be connected by a registered installer! The electrical connection must
comply with national and local regulations.
Warning! This appliance must be earthed at all times.
Installation, maintenance, or repairs should only be carried out by professionals who are
authorised by the manufacturer, as failure to do so will void the guarantee.
The device should be disconnected from the mains prior to installation, maintenance or repairs.
The device is only disconnected from the electric power if:
• The main switch of the domestic electrical system is switched off, the fuse of the domestic
electrical system has been completely removed, or the plug has been pulled out of the socket.
Faulty parts may only be replaced by original Pelgrim parts. Only those parts are guaranteed by
Pelgrim to meet the safety requirements.
To avoid dangerous situations resulting from any damage to the connecting cable, this should
only be replaced by the manufacturer, the manufacturer’s service organisation or suitably
qualified persons.
Electrical connection
230–240 V~ - 50/60Hz
• Wall socket and plug must be accessible at all times.
• Make sure that the cable does not come into contact with parts of the oven that may
become hot.
• If you want to make a fixed connection, ensure that a multi-pole switch with a distance
between contacts of 3 mm is installed in the supply cable.
• Do not use a multiple socket or an extension lead to connect the device to the electrical
mains. Safe use of the device cannot be guaranteed with such accessories.
Consult the wiring diagrams on the back of the appliance.
Make the required connections on the connecting block.