Pelgrim PFI8160WIT, Инструкция по эксплуатации

Страница: 46 / 68

EN 14
Indications in the display
In display
Status
Power setting cooking zone; 1 = low setting / 9 = high setting
Boost function active.
No (suitable) pan on cooking zone (pan detection symbol).
Child lock function selected.
Fault code; See ‘Troubleshooting table’.
Residual heat indicator; The hob has a residual heat indicator for each cooking
zone to show those which are still hot. Although the hob is switched off, the
indicator ‘H’ will remain on for as long as the cooking zone is hot!
Avoid touching them when this indicator is lit.
Danger! Risk of burns.
Hob power consumption; Appliance is suitable for 3 fase connection
(See ‘Installation’).
Hob power consumption; Appliance is suitable for 2 fase connection
(See ‘Installation’).
Induction noises
A ticking sound
• This is caused by the capacity limiter on the left and right zones. Ticking can also occur at
lower settings.
Pans are making noise
• Pans can make some noise during cooking. This is caused by the energy flowing from the
hob to the saucepan. At high settings this is perfectly normal for some pans. It will not
damage either the pans or the hob.
The fan is making noise
• To enlarge the lifespan of the electronics, the appliance is equipped with a fan. If you use
the appliance intense, the fan is activated to cool down the appliance and you will hear a
buzzing sound. The fan runs on for several minutes after the hob has been switched off.
USING THE HOB