Pelgrim PFI7160, Руководство пользователя

Страница: 40 / 48

EN 18
Troubleshooting table
If you are uncertain about whether your appliance is functioning properly, this does not
automatically mean there is a defect. Try to deal with the problem yourself first by checking the
points mentioned below in the table or visit our website ‘www.Pelgrim.nl’ for more information.
Problem with the hob Possible cause Solution
The fan runs on for several
minutes after the hob has been
switched off. The hob is cooling down. Normal operation.
A slight smell is noticeable the
first few times the hob is used. The new appliance is
heating up. This is normal and will
disappear once it has been
used a few times. Ventilate
the kitchen.
The pans make a noise while
cooking. This is caused by the energy
flowing from the hob to the
saucepan. This is normal for certain
saucepans, particularly at
high settings. This does not
harm the pans or the hob.
You have switched on
a cooking zone, but the display
keeps flashing. The pan used is not suitable
for induction cooking. Use a good pan.
A cooking zone suddenly
stops working and you hear
a signal. The preset time has ended. Press any button to switch off
the signal.
The hob is not working and
nothing appears in the display. There is no power supply due
to a defective cable or a faulty
connection. Check the fuses or the
electric switch (if there is no
plug).
A fuse blows as soon as the
hob is switched on. The appliance is incorrectly
connected. Check the electrical
connections.
Fault code F and C. Appliance overheated. Let the appliance cool down
and then start again.
Other error codes Defective generator. Contact your service centre.
MALFUNCTIONS