Pelgrim IKR3084F/P01, Инструкция по эксплуатации

Страница: 67 / 76

EN 31
MAINTENANCE
Cleaning the grid and filters
1. Remove the grid with the filter from the extraction inlet.
2. Carefully slide the grease filter off the grid.
• Clean the grid with hot water and neutral soap, without using abrasive sponges (do not use
detergents!). Do not wash the cast iron grid in a dishwasher.
• Clean the grease filter, when in use, at least every week (or when the filter saturation
indication system indicates this necessity. This will maintain good performance of the
extractor and prevent a potential fire hazard, caused by excessive grease build-up.
• Clean the grease filter with a non-aggressive detergents, preferably by hand or els in the
dishwasher, which must be set to a low temperature and a short cycle.
Carbon filters (recirculation use)
The carbon filters are located on both sides of the grease filter and on the underside of the
grease filter. These filters are regenerable by washing and drying them well. To do this, follow the
next procedure.
The regenerable active carbon filters can be washed by hand or in the dishwasher at a maximum
temperature of 65 °C. The washing cycle must be done without other dishes and without
dishwasher detergent. Do not use any cleaning agents!