Pelgrim IDK862ONY, Руководство пользователя

Страница: 28 / 76

EN 10
• If one of the cooking zones is set to boost and you want to set the
other zone to setting 9 or Boost, the cooking zone that is set to
boost will automatically be switched to a lower setting.
• Two cooking zones that are beside each other do not influence
each other. You can set both cooking zones to Boost.
Bridge mode
(only with ‘Flex’ cooking zones)
The bridge mode can be activated by pressing the bridge button. Both
zones on the front and rear will have the same settings after activating
this function (they are now connected). The displays and keys of the
section of the most rear zones will not work. Changing the settings is
only possible with the multi slider of the zones in the front. When the
timer is active, the timer indicators in the timer display will illuminate for
both bridged zones at the same time.
Use a (fish) pan where at least one of the centre/middle positions of the
zones is covered.
Activating the bridge mode
• Put a pan (or two/three pans) on the cooking zones that you want
to set to the bridge mode.
• Touch the On/Off button.
You will hear a short bleep and the display for each cooking zone
will show ‘0.’. If no further action is taken, the hob automatically
switches off after 10 seconds.
• Press the bridge button on the left or on the right.
The bridge indicator will illuminated and you will see a bridge
symbol in the display.
• Touch and slide your finger over the multi slider of the bridged
cooking zone to choose the correct setting. The hob will
automatically start in the chosen setting (if it detects a pan).
▷ You can link the bridged zone to a timer; in this case you will
also see a timer symbol in the display.
Deactivating the bridge mode
• Press the bridge button on the left or on the right again.
The bridge indicator and the bridge symbol in the display will
disappear. The cooking zones are set to ‘0’.
OPERATION