Pelgrim IDK862ONY, Руководство пользователя

Страница: 27 / 76

EN 9
OPERATION
Switching on the automatic heat-up function
The hob is switched on and a pan is on a cooking zone.
• Touch and slide your finger over the multi slider of the desired
cooking zone to choose the correct setting and hold down your
finger on that setting for 3 seconds.
‘A.’ and the correct setting flash alternately in the display, the
automatic heat-up function is active.
▷ If you select a lower cooking stage, the automatic heat-up
function is switched off.
▷ If you select a higher cooking stage, the duration of the heating-
up will automatically be brought in line with the new cooking
stage.
• As soon as the automatic heat-up time is over, the automatic
heat-up function automatically switches off and the cooking zone
continues at the set power.
The table below shows the duration of the automatic heat-up function
for each power setting:
Setting 1 2 3 4 5 6 7 8
Seconds 40 72 120 176 256 432 120 192
Switching off the automatic heat-up function
The hob is switched on. ‘A.’ and the power setting flash alternately in
the display.
• Touch and slide your finger (to the left) over the multi slider of the
desired cooking zone to set a lower level.
Or:
• Directly select a lower setting by touching the left side of the multi
slider of the desired cooking zone.
A different power setting is shown in the display and ‘A.’ stops flashing.
Two cooking zones behind each other
• Two cooking zones that are behind each other influence each other.
The power is automatically distributed when these cooking zones
are used at the same time. This does not have any consequences
up to setting 9. Selecting the Boost setting for one of the cooking
zones, however, automatically switches the other cooking zone to
a lower setting.