Pelgrim GK210, Руководство пользователя

Страница: 65 / 74

65
6 Faults
FAULT CAUSE SOLUTION
A burner does not ignite. Wrong type of gas used.
Control knob not kept
pressed in far enough.
Check that the gas used is
suitable for the appliance. If
not, contact your gas fi tter.
Keep the control knob
pressed in far enough
between full and low. At
fi rst use this can take some
more time because of the
gas supply.
The burner does not burn
evenly.
Burner parts incorrectly
installed.
Burner parts dirty or damp.
Wrong type of gas used.
Assemble the burner parts
using the centring ridges.
Clean and dry the burner
parts, making sure that the
outfl ow holes are open.
Check that the gas used is
suitable for the appliance. If
not, contact your gas fi tter.
The burner goes out after
igniting.
Control knob not kept
pressed in far enough.
Keep the control knob
pressed in for at least
5 seconds.