1
2
3
4
5
6
7
8
Regular Use
It is recommended to unplug Lomi and remove the bucket from the unit before
adding waste.
Open Lid
Grab the handle of the lid and turn counterclockwise until the unlock arrow on the
lid is lined up with the arrow on the bucket.
Remove the bucket from the unit.
Using the handle, pull the bucket straight up from the unit.
Add waste to the bucket.
Refer to “What can I put in my Lomi?” on page 9 for guidance.
- Waste must fit into the bucket without using force
- Cut waste into smaller pieces if necessary
- Fill up the bucket until 75% full
Place the bucket with waste back into the unit.
Insert the bucket by aligning the arrow on the rim of the bucket with the arrow on
the interior of the unit. If the bucket does not fit into place, slightly turn the bolt
on the bucket’s bottom and try again.
Close the lid.
Align the lid’s unlock arrow with the arrow on the Lomi body and turn the
clockwise until the lid’s lock arrow lines up with the arrow on the Lomi body.
Plug Lomi in.
LED lights will flash green once.
Start a cycle by pressing the button.
Default mode is Eco-Express.
To change modes, press the button medium long (2-3 seconds).
Refer to the “Interface” section on page 8 for more information on button use.
Cycle completion.
Once the cycle is complete, all the LED lights will be green and Lomi will beep
once.
Remove the bucket to empty it. All dirt that comes out of Lomi can be put into the
green bin. Grow mode dirt can be mixed with soil for use in your garden and
houseplants.
Please see “How to feed your garden with Lomi” on page 12.
EN
Instruction Manual 1.2 -
7
Visit
pela.earth/get-started
for more info.
