pela tools 498189, Руководство пользователя

Страница: 13 / 24

Contact
PELA Tools
Solängsvägen 13
SE-513 70 Borås
Phone: 033-202650
E-mail: order@pelatools.com
Environmental protection /
Scrapping
Recycle any unwanted material,
do not throw it in the household
rubbish. All machines, accessories
and packaging must be sorted and left
at a recycling center and disposed
of in an environmentally friendly manner.
Operator safety: Mandatory reading
Safety is the most important consideration when
operating this machine. The following instructions
must always be followed: There are some
applications for which this tool has been designed.
We strongly recommend that this tool isn’t being
modified and/or used for any application other
than that for which it was designed. If you have any
questions about its application, do not use the tool
until you have contacted us and we have informed
you.
General safety instructions
GET TO KNOW YOUR MACHINE.
Read the operating instructions carefully. Learn the
machine’s applications, work opportunities and the
special potential for it.
WARNING! ALWAYS MAKE SURE ALL MACHINES
ARE EARTHED.
If your machine is equipped
with a grounded plug, you
must connect it to a
corresponding grounded
electrical wall socket.
ALWAYS AVOID HAZARDOUS
ENVIRONMENTS.
Never use the machine in humid
or wet places. Keep your work
area well lit and clean.
WARNING! Remove ALL
ADJUSTMENT KEYS AND
WRENCHES FROM THE
MACHINE AFTER USE.
Make it a habit to always
check that keys and
adjustment keys are removed from the machine
before turning it on.
Always keep your workplace clean. Messy areas
and work tables invite accidents.
WARNING! ALWAYS KEEP
VISITORS AWAY FROM
MACHINES IN USE.
All visitors must be kept at a
safe distance from the work
area. ALWAYS MAKE THE
WORKPLACE CHILD SAFE
with padlock, main switch or by removing start
buttons.
WARNING! NEVER USE
MACHINES UNDER THE
INFLUENCE OF DRUGS,
ALCOHOL OR MEDICINE.
WARNING! ALWAYS USE
SUITABLE CLOTHES.
Never wear loose clothing
or jewellery that can get
caught in moving parts.
Non-slip shoes are
recommended for the best
grip.
WARNING! ALWAYS USE SAFETY
GLASSES. Also, use a face or dust
mask if cutting/sawing causes
dust.
WARNING! Never reach
over the machine. Always
keep your balance at all
times.
WARNING! ALWAYS
DISCONNECT THE POWER /
CONNECTOR before service
and when replacing
accessories such as blades, bits and
cutters. ALWAYS AVOID improper
start. Make sure the switch is in the
”OFF” position before plugging in.
NEVER LEAVE THE MACHINE
UNPLUGED.