pela tools 490448, Руководство пользователя

Страница: 9 / 12

Adjustment of stop
1. Release the vacuum cleaner bracket using the
locking handles (see picture 3).
2. Release the nuts (see picture 1 + 2)
3. You can now change the depth by moving the
vacuum cleaner bracket from or towards you.
4. You can also move the stops to fit a longer or
shorter workpiece option.
Mount stop
1. Fit the screw, washer and nut on the vacuum
cleaner bracket.
2. Now apply the stop.
1
2
Installation of cutter
1. Get help from another person when installing
the cutter.
2. Tilt the table to 45 ° to install the cutter. Lock
the table in the inclined position by moving the
”paths” on each side to the locked position.
3. Insert the 4 screws into the clamping plates in
the T-slots on the underside of the table.
4. Mount the spindle through the hole on the
table.
5. Adjust the flange thickness screw so that the
clamping plates fit on the cutter flange.
6. Tighten the clamping plates to the cutter using
an open wrench to turn the hexagonal shaft.
Tilting of tables
1. Loosen and remove the lock on the table.
2. Tilt the table up using the handles at the back
edge.
3. Lock the table in the inclined position (45 °) by
moving the ”paths” on each side to the locked
position.
3
1
2
3