PEKO ETS-1500, Инструкция по установке и эксплуатации

Страница: 6 / 16

INSTALLATION INSTRUCTIONS (cont.)
Page 6
Installation and Operating Manual
LOCATING AND FIXING THE CABINET
The appliance should not be located in a
position such that any doorways or safety exits
are impeded with the cabinet door open and
the hanging rails extended.
The drying cabinet is only designed for
operation indoors in a dry environment at a
temperature above freezing point.
The unit should not be installed in areas where
high pressure water cleaning is carried out.
The drying cabinet can be conveniently
installed above a front loading washing
machine, tumble dryer or worktop subject to
the ceiling height in the room. A clearance of
5mm. is recommended when installing above a
washing machine or tumble dryer to ensure
that the cabinet is insulated from any vibrations
that may occur when these machines are in
operation. This will also ensure that the
machines can be removed should any service
or repair work be necessary.
The measurement from the underside of the
cabinet to the lower edge of the support
bracket is 1450mm. Determine the position of
the cabinet and ensure that the support bracket
(1) is level and securely fixed to the wall.
Assistance is required to lift the cabinet onto
the bracket. With the cabinet suspended on
the wall it is now possible to open the door and
drill through the four locations (2) to fix the
cabinet to the wall avoiding any electrical,
water or other service pipes or cabling. Drill
four 8mm holes through the rear panel into the
wall and insert the wall plugs.
With the spacers and washers supplied, screw
the cabinet back to the wall.