GB - 2
PEHA_M_941_TAB (Rev04_130313)
126339-03
PEHA Elektro GmbH & Co. KG
Postfach 1727 • D-58467 Lüdenscheid • Tel.: (02351)185-0 • Fax: (02351)27666 • e-mail: [email protected] • Internet: www.peha.de
CurrEnT DrAIn
To calculate the power consumption for the power supply a consumption of 40 mA
should be planned for the panel with 16 inputs and 50 mA should be planned for the
panel with 32 inputs.
TECHnICAL DATA
DISPoSAL oF THE DEVICE
Do not dispose of old devices in the household waste! The device must be
disposed of in compliance with the laws and standards of the country in which it
is operated! The device contains electrical components that must be disposed of
as electronics waste. The enclosure is made from recyclable plastic.
wArrAnTy ConDITIonS
These operating instructions are an integral part of both the device and our terms of
warranty. They must be handed over to the user. The technical design of the appliance
is subject to change without prior notification.
PEHA
products are manufactured
and quality-checked with the latest technology according to applicable national and
international regulations. Nevertheless, if a product should exhibit a defect,
PEHA
warrants to make remedy as follows (regardless of any claims against the dealer to
which the end user may be entitled as a result of the sales transaction):
In the event of a justified and properly established claim,
PEHA
shall exercise its
prerogative to either repair or replace the defective device. Further claims or liability
for consequential damage are explicitly excluded. A justifiable deficiency is deemed to
exist if the device exhibits a structural, manufacturing, or material defect that makes it
unusable or substantially impairs its utility at the time it is turned over to the end user.
The warranty does not apply to natural wear, improper usage, incorrect connection,
device tampering or the effects of external influences. The warranty period is 24 months
from the date of purchase by the end user from a dealer and ends not later than 36
months after the device’s date of manufacture. German law shall be applicable for the
settlement of warranty claims.
Power supply PHC System
(PHC bus)
Nom. 24 V DC (SELV)
21-28 V DC (ripple voltage 5 %)
own consumption
40 mA (16 inputs) or 50 mA (32 inputs)
operating panel
16 or 32 membrane keys
number of inputs
16 inputs (
I
0-
I
15) with status LED
32 inputs (
I
0-
I
31) with status LED
Input module bus
4 screw terminals (24V, +A, -B, 0V)
Coding
DIP switch, 5-pin (Module address)
Ambient temperature
+10 to + 50°C
Storage temperature
-20 to + 60°C
Screw terminals
max. 1 x 1.5 mm²
Test specifications
EN 50090-2-2
Certifications
CE
Protection level
IP20
Dimensions
213 mm x 125 mm x 35 mm
