Pegasus Power pos lite, Руководство пользователя

Страница: 14 / 43

POS LITE
Cash Drawer Installation
Before connecting the cash drawer to the POS LITE , please make sure the drive voltage and
cable pin assignment of the cash drawer matches the definition of the cash drawer port of
POS LITE . Please refer to the jumper setting and pin definition(for more information on the
Cash Drawer.
Plug cash drawer cable into cash drawer port.
Note: If the cash drawer cannot be detected by the system, please refer to troubleshooting.
Up to two cash drawers may be driven from this port. Driving voltage of the solenoid is
DC+12V. I/O port 284 is used for drawer operation. A test program is supplied, for Linux
and Windows, sample code of which is available on request by software developers.
Value Description
0x284 Output address.
0x284 read 8bit Bit 2 => 0: low 1: high
0x200 Sleep 200ms
0x01 Open cashdrawer1 value.
0x02 Open cashdrawer2 value.
0x04 Close cash-drawer value.
0x04 Cash-drawer status mask.
9