Pegasus PDCHRDN-700AI Скачать руководство пользователя страница 3

1

 Important Safety Information

FCC Compliance Statement

The equipment has been tested and found to comply with the limits for a Class 

A digital device, pursuant to Part 15 of the FCC Rules. The limits are designed to 

provide reasonable protection against harmful interference when the equipment 

is operated in a commercial environment. This equipment generates, uses, and 

can radiate frequency energy and, if not installed and used in accordance with the 

instruction manual, may cause harmful interference to radio communications. 

Operation of this equipment in a residential area is likely to cause harmful 

interference, in which case users will be required to correct the interference at their 

own expense. 

FCC Caution: 

To ensure continued compliance, use only shielded interface cables when connecting 

to computer or peripheral devices. Any changes or modifications not expressly 

approved by the party responsible for compliance could void the user’s authority to 

operation this equipment. 

Warning and Operating Notest

Installation and serving the camera should be performed only by qualified and 

experienced technicians to conform to all local codes and to maintain your warranty.

WARNING! 

The use of CSA certified/ UL Listed Class 2 power adapters 

 

                          are required to ensure compliance.

WARNING! 

To reduce the risk of fire or electric shock, do not expose the

 

                           product to rain or moisture.

Operating Notes

Power Supply: 

This dome camera can operate on AC 24V or DC 12V.

Operating Conditions

•  Avoid viewing very bright objects (example, light fixtures) for extended periods.

• 

Avoid operating or storing the unit in the following locations:

 

- Extremely humid, dusty, hot, cold environments (where the operating 

temperature is outside the recommended range of 14°F to 122°F [-10°F to 
+50°F].

 

- Close to sources of powerful radio or TV transmitters

 

-

Close to fluorescent lamps or objects reflecting light

 

-

Under unstable light sources (may cause flickering)

Содержание PDCHRDN-700AI

















Отзывы: