background image

11

 OSD SETTINGS

If SHUTTER/AGC is set to MANUAL, the submenu is shown as below. The shutter 

speed is a variable from 1/50(1/60)sec to 1/10000sec and the AGC is selectable 

depending on your environment condition.

MODE 

 

OFF

SHUTTER   

1/50(1/60)

AGC 

 

6.0

3.3 WHITE BAL

WHITE BALANCE controls color on the screen. Options include ATW (Auto White 

Balance), PUSH, PUSH LOCK, USER1, USER2, ANTI CR (Anti Color Rolling 

Suppression) and MANUAL. The default is ATW. 

• 

ATW:

 Select ATW when the scene illumination varies between indoor scenes and 

outdoor scene lighting. 

SPEED 

 

171

DELAY CNT 

152

ATW FRAME 

X0.50

ENVIRONMENT 

INDOOR

• 

MANUAL:

 You can manually adjust the LEVEL from 15 to 69.

• 

USER1/USER2:

 You can adjust blue setting (B-GAIN) and red setting (R-GAIN) 

value from 0 to 255.

• 

PUSH:

 When selected in the appropriate position, the whole area will perform 

white balance. 

• 

PUSH LOCK:

 When selected in the appropriate position, WHITE BALANCE will 

perform once.

3.4 BACKLIGHT

Set Backlight compensation function. It controls the light level to overcome 

sever backlight conditions. Available options include OFF, BLC or HLC (Highlight 

Compensation) mode. The default is OFF. 

If HLC is selected, HLC is activated automatically when the camera detects high-

luminance.

3.5 PICT ADJUST

PICTURE ADJUST allows you to adjust picture settings for optimal image. In the PICT 

ADJUST submenu, you can adjust BRIGHTNESS, CONTRAST, SHARPNESS, HUE and 

GAIN value. In addition, you can set MIRROR to ON to reflect the image.

MIRROR   

OFF

BRIGHTNESS 

000

CONTRAST 

128

SHARPNESS 

128

HUE 

 

128

GAIN 

 

128

Содержание PDCHRDN-700AI

















Отзывы: