PEGAS-GONDA PEGAS 235, Руководство пользователя

Страница: 21 / 35

ISO 9001
PEGAS 235 AUTOMAT CNC - 21 - tel.-fax : 00420-544 221 125
tel.
CONTROLS ON KEYBOARD
SEMI-AUTOMATIC mode
PIECECOUNTER
In SEMI-AUTOMATIC mode it is possible to change the piececounter parameters, which can be
increased or decreased.
DECREASING PIECECOUNTER:
To insert the value in manual piececounter, press the ENTER key and then the 4 figures
referred to the piececounter value. Confirm once again with the ENTER key. From now on, the
counter will decrease on each cut until it reaches 0.
E.G.: + 250 + ( to count 250 pieces).
INCREASING PIECECOUNTER:
To increase the value on the piececounter, set it to 0: press the ENTER key and then 0 and
then ENTER again.
RED LEDs + 4-DIGIT DISPLAY
The 4-digit display shows different information according to the red LED ( Light ). To change the
displayed information, press the grey key located aside:
Blade speed. If flashing : Blade not tightened or broken
Displays in mm the material
infeed axis.
Piececounter.
Length of the piece to cut (in
mm). Operable in AUTOMATIC MODE only
LEFT-HAND SINGLE DISPLAY
Display showing machine state: Automatic/Semi-automatic:
Display Off MACHINE IN SEMIAUTOMATIC MODE
A number
from 1 to 9 MACHINE IN AUTOMATIC MODE , Program (or size) selected No. xx
( e.g. 2 )