manualshive.com logo in svg

Peg-Perego Primo Viaggio, Инструкция по эксплуатации

Поделиться
Скачать
Peg-Perego Primo Viaggio Скачать руководство пользователя страница 44

- 44 -

Installing The Car Seat In A Vehicle

REAR FACING INSTALLATION USING 

UAS SYSTEM (LUAS)

Take the latch strap out of  the compartment 

under the seat following instruction at 

page 

18,19, 20

. Attach the connectors to the anchor 

(a - click) on both sides. Push on the seat (b) 

and at the same time pull the free end of the 

latch strap (c); let the free end of the strap 

through the opening so that it is oriented 

parallel to the anchor strap as shown in the 

picture. Put the upholstery back in place. The 

seat is ready for use.

IMPORTANT! WEIGHT AND HEIGHT LIMITS:

 

do not install by this method for a child 

weighing more than 16 kg (35 pounds). 

IMPORTANT! ANGLE CHANGE: Check the 

angle of the backrest. If a change in position 

is necessary, change the angle to the desired 

position (d) following instruction at 

page 22, 

making sure that the seat clicks in one of the 

available position (1to 6).

Changing angle in rear facing mode, does 

not require re-installation of the seat.

Verify that the child restraint is secure. A

secure child restraint will not move more 

than 1 inch near the seat belt anchors.

a

b

c

Содержание Primo Viaggio





































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды