manualshive.com logo in svg

Peg-Perego Primo Viaggio, Инструкция по эксплуатации

Поделиться
Скачать
Peg-Perego Primo Viaggio Скачать руководство пользователя страница 41

- 41 -

Seat Belts - Which Ones Are Safe To Use With This Car Seat

Lap/shoulder belt (3-point) with 

Emergency Locking Retractor (ELR) and 

with a locking latch plate. This type of belt 

can be adjusted by pulling/releasing the 

strap at the latch plate adjuster. Please refer 

to your vehicle owner’s manual for details.

Note: make sure the latch plate properly 

locks when installing the car seat with a 

locking latch plate.

Note: some vehicles are equipped with 

switchable latch plate that can switch from a 

sliding type to a locking type. In this specific 

case, make sure that the latch plate is in a 

locking mode.

Lap/shoulder belt (3-point) with 

Emergency Locking Retractor (ELR) 

and free sliding latch plate. This type 

of seat belt has a latch plate that moves 

freely along the belt; it will only lock in an 

emergency (sudden stop or crash) so you must 

use a Locking Clip to secure this type of belt. 

If additional help is needed, consult 

with a Child Passenger Safety Technician 

(CPST) or call Customer Service @ 

1-800-661-5050  or send an e-mail to 

[email protected].

ELR

ALR 

RF

ELR

Содержание Primo Viaggio





































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды