- 35 -
Installing your child restraint in the vehicle
5.
Push the child restraint firmly into the
vehicle seat and pull the vehicle belt in order
to tighten the child restraint, eliminating
any slack. Follow the procedure shown in
the picture making sure that while the seat
is pushed down (A), the lap portion of the
belt is pulled from the fixed point toward the
buckle (B). Then pull the diagonal portion of
the belt (C).
6.
Make sure that only the lap portion of the
belt passes through the opened lockoff clips
and then close them on both sides following
the procedure shown in picture (D and E).
7.
Attach TOP TETHER strap to your
vehicle following instructions at page 20.
Picture shows the correct belt pattern
when the child restraint is installed
in the forward facing mode using a
lap and shoulder belt and top tether.
Verify that the child restraint is secure. A
secure child restraint will not move more
than 2.5 cm (1 inch) near the seat belt anchor.
5
6
7
A
B
C
D
E
