- 29 -
REAR FACING MODE USING LAP
BELT (TYPE I)
1.
Recline the child restraint to the rearfacing
position as shown in the picture. To recline
the seat, pull the handle located below the
front edge of the shell (A) as shown in detail.
An audible "click" is heard when the seat is
properly locked into position.
2.
Disengage the rebound bar under the seat
and rotate it until it clicks in position as shown
at page 19. Lean the reclined child restraint,
unoccupied, on the selected vehicle seat.
3.
Pull the vehicle belt at full available length
and thread through the openings under the
seat area as shown in the picture.
IMPORTANT: check inside
the shell openings;
verify that the belt is
placed as shown
in the picture.
Installing your child restraint in the vehicle
2
1
3
A
A
B
