Peff Buffre, Руководство по эксплуатации

Страница: 13 / 37

Loop On
On occasion you may need to restrain the beat repeat effect and limit
playback to only one cycle, and there are two different controls which
limit loop cycling. These are the
Loop On and One Shot controls.
Loop On
For normal repetitive beat repeat effects, the Loop On button must be
enabled. When the button is disabled, the repeater effect will playback
one cycle then cease all playback until the trigger is released. When
the trigger is released, the incoming audio passes through normally.
Switching the button on again, while holding the trigger, resumes normal loop playback.
C Loop On Disabled
When in Current Playback Mode, Buffre simply becomes a triggered gate. The
incoming audio passes through for the duration of the loop trigger, and at the end of the
loop, playback stops.
Current (FW<->BW) + Loop On Disabled
With Buffre is set in either of the pendulum (FW<->BW) modes, playback will cycle
through both the forward and backwards phases of the cycle then stop until the trigger
is released.
v1.0.2 operation manual
13