8 of 42
ISSUED: 12-01-09 SHEET #: 095-9295-2 01-23-10
Wall arm assembly (
A
) must be in closed position to
hang screen.
Rotate safety latch with flathead screwdriver into
unlocked position as shown in detail 1.
Hook adapter brackets (
B
) onto the center of wall
arm assembly (
A
) adapter plate as shown in figure
3.1.
Mounting and Removing Flat Panel Screen
• Always use an assistant or mechanical lifting equipment to safely lift and position the flat panel screens.
• Be careful not to pinch fingers when opening and closing mount from the wall.
• DO NOT operate or tilt arm assembly when safety latches are in unlocked position. Product may fail and may cause
injury or damage to screen.
• Do not tighten safety/security screw (
E
) with excessive force. Overtightening can cause screw head to become dam-
aged making it difficult to remove. Tighten screws to 15 in. • lb (1.7 N.M.) maximum torque.
WARNING
3
SAFETY LATCH
DETAIL 1
A
B
fig. 3.1
SAFETY
LATCH
DETAIL 2
DETAIL 3
A
B
E
Rotate safety latch with flathead screwdriver and
install safety/security screw (
E
) through safety latch
into adapter bracket with phillips screwdriver to lock
to adapter plate as shown in detail 2 and detail 3.
