peerless-AV WL-AU-AVWS, Инструкция по установке и сборке

Страница: 9 / 24

9
ISSUED: 2012-10-11 SHEET #: 180-9041-2 2012-05-31
A
P
Using the keyholes in the back of enclosure assembly (
A
), place enclosure assembly (
A
) on to
the two 1/4"20 x 2.5" phillips screws (
P
) as shown in fi g. 2.6. Slide enclosure assembly (
A
) over
until the mark on the wall plate lines up with the center of the 1/4"20 x 2.5" phillips screws (
P
) as
shown in detail B.
NOTE:
When mounting on 16" stud centers, use bottom set of slots. For 20"
and 24" stud centers, use top set of slots.
1
KEYHOLE
fi g. 2.6
fi g. 2.7
DETAIL B
P
1
Position enclosure on wall. Install remaining two 1/4"20 x 2.5" phillips screws (
P
). Level
enclosure assembly (
A
) and tighten all screws.
A