8 of 41
ISSUED: 01-25-12 SHEET #: 095-9370-5 02-22-13
If you have any questions, please call Peerless customer care at
1-800-865-2112
.
If you have any questions, please call Peerless customer care at
1-800-865-2112
.
Begin with the shortest length screw, hand thread through multi-washer and adapter bracket into display as shown
below. Screw must make at least three full turns into the mounting hole and fi t snug into place. Do not overtighten.
If screw cannot make three full turns into the display, select a longer length screw from the baffl ed fastener pack.
Repeat for remaining mounting holes, level brackets and tighten screws.
NOTE:
Spacers may not be used, depending upon the type of display.
Begin with longer length screw, hand thread through multi-washer, adapter bracket and spacer in that order into
display as shown below. Screw must make at least three full turns into the mounting hole and fi t snug into place.
Do not overtighten. If screw cannot make three full turns into the display, select a longer length screw from the
baffl ed fastener pack. Repeat for remaining mounting holes, level brackets and tighten screws.
For Flat Back Display
For Bump-out or Recessed Back Display
3-1
3-2
DISPLAY
DISPLAY
MULTI-WASHER
MULTI-WASHER
SCREW
SCREW
fi g. 3.2
fi g. 3.1
SPACER
ADAPTER
BRACKET (
B
)
ADAPTER
BRACKET (
B
)
