8
2015-02-05 #:220-9004-1
1. Flip the Media Player Enclosure over and
unscrew the 4 screws on the metal base
plate. Remove the metal base plate.
2. Run the cable(s) for the Media Player through
the cable entry points on the Media Player
Enclosure as shown.
Note:
It is suggested to only use one of the cable
entry points.
Note:
Do not run the Media Player's power cord
through the entry points. The power cord will be
installed later.
Cable
Entry/Exit
3. Realign the metal base plate on the Media
Player Enclosure. Reinstall the 4 screws
into the metal base plate while making sure
the wires are fully sealed (Cables should be
completely surrounded by compressible foam
gaskets and gasket block).
Note:
Ensure that the base plate is reinstalled in
the proper orientation.
