background image

 

 

INSTALLATION GUIDE  

ENGLISH  

Code:

  ARAD4S 

Name: 

RACK 4U/270mm universal enclosure  

for RACK 19" two-level cabinets

 

Metallic enclosure for RACK cabinet: CCTV, KD, SSWiN, RTV, LAN 

 

 

IM ARAD4S 

 

 Edition: 2 from 04.10.2021 

Supersedes the edition: 1 from 20.03.2017

 

            

                                                                                                                                                                           

EN 

 

1. Intended use:

 

 

 

Due to its design, the ARAD4S enclosure is intended for mounting inside RACK 19'' cabinets. This general-

purpose enclosure may serve as an auxiliary element for integrating CCTV, AC, I&HAS, RTV, LAN systems in RACK 19'' 

cabinets. It is intended for mounting alarm control panels, AC controllers, power supply units, batteries, etc. 

 
2. Description 

 

           

       The enclosure is equipped with two bottom-mounted mounting plates and a removable hinged mounting plate  
(I and II level) for mounting electronics/transformers/power supply units. The enclosure can accommodate a 17Ah/12V 

battery and it features tampering protection (against unwanted opening). To enable leading cables into the enclosure, 
one can buy a cable protection conduit of any length and a cable gland. The conduits and the cable glands are available 
at the following codes: 

1)

 

ARAP16P

 – cable gland, inside diameter 16 mm – connection between the protection conduit and the enclosure 

2)

 

ARAP21P

 – cable gland, inside diameter 21 mm – connection between the protection conduit and the enclosure 

3)

 

MM019

 –  cable protection conduit , inside diameter 16 mm 

4)

 

MM020

 –  cable protection conduit, inside diameter 21 mm 

 

The 

ARAD4

 enclosure has a space for up to 4x ARAP16P and 8x ARAP21P cable glands. 

 

    Optionally, 

ARAW45 

fans can be mounted. They trigger airflow inside the enclosure after exceeding 45

o

C. One 

enclosure can accommodate max. two fan units in the rear part of the enclosure. 

 
 

                                                                         

      

 

 
 

 

 

 

 
 
 

 

 

 

 

 
 
 

 
 

 
 
 

Содержание ARAD4S






Отзывы: