Peecon Cargo Compact Series, Руководство оператора

Страница: 49 / 64

49
M8 13 27
M10 17 57
M12 19 101
M14 22 148
M16 24 230
M18 27 348
M20 30 464
M22 32 634
M24 36 798
M27 41 1176
M30 46 1597
49
Maintenance and inspection
5.5 Monthly maintenance items
Do not forget to also carry out the weekly inspection in combination with these items!
●
Clear the hydraulic valve block of any serious contamination, such as sand.
●
If present: Check and clean the oil filter if it is visibly contaminated.
●
Make sure that the oil tank's de-aeration valve is free from dirt; clean it if necessary.
5.6 Annual maintenance items
(or after 2,000 container changing cycles, whatever is reached the first)
●
Replace the oil filter.
●
Replace the oil if necessary.
●
General inspection.
5.7 After commissioning
●
Do not clean the installation using a steam or pressure cleaner for the first six weeks after
commissioning the installation, since the paint may still have not hardened to its full strength.
●
When cleaning the machine, always make sure not to apply the jets of steam or pressure cleaners
to the lubrication points, cylinder seals and steering/control valves at any time during the machine's
lifetime. Apply new grease to all lubrication points after cleaning.
●
All bolts, nuts and connections must be checked and, if necessary, tightened after about 8 machine
hours.
5.8 Decommissioning for more than 1 month
●
Thoroughly clean and dry the machine.
●
Check all moving parts and the protection of the machine. Replace/Repair them if necessary.
●
Check that all bolts and nuts have been tightened correctly.
●
When not in use, the machine should preferably be parked in a covered, locked location.
5.9 Torques
A summary of the torques of the various bolts on the hook systems is provided below
Nominal dimensions Spanner width (mm) Torque (Nm)
Tab. 5-1 Torques for 8.8 bolts