Peecon Cargo Compact Series, Руководство оператора

Страница: 48 / 64

48 48
Maintenance and inspection
5.2 General inspection
Proper maintenance extends the service life of the hook system. Any defects can then be found at an early
stage, so as to prevent any further or consequential damage or loss. Peeters Landbouwmachines B.V. does
not accept any responsibility for direct or consequential damage or loss resulting from poor maintenance.
Heed the following warnings before carrying out the necessary maintenance activities.
●
Only carry out maintenance if the system has been placed in a straight and stable position and the
tractor has been uncoupled.
●
Never seal any holes or leaks in hydraulic hoses or pipes with your bare/covered fingers and/or hands.
Replace the entire circuit.
●
If you carry out repairs on a raised installation, always install a support under the tipping frame. (see
chapter 5.1)
●
Always wear safe clothing and shoes and work in an uncluttered and clean work environment.
●
Only use water to clean the machine; do not use any aggressive cleaners.
Make sure that you can guarantee that all the recommended lubrication points are lubricated and that no
oil and/or grease can spill into the local environment. Oil and grease that drain into the soil pollute the
environment.
5.3 Daily inspection
Before starting to work with the hook system, you must always do the following checks:
●
Check the entire construction for visible tears and cracks and any deformation.
●
Check that the unloading doors work properly.
●
Check the operation/controls in combination with the hydraulic valve block for defects.
●
Check the hydraulic hoses and circuits for leaks, damage and that they are not obstructed.
●
Check the hydraulic cylinders for leaks.
●
Check the operation of the safety catch on the hook.
●
Check that sufficient oil is available for the hydraulic system.
NOTE! Never top up the oil in the oil tank if not all the cylinders have been extended. Changes
in its level might otherwise cause the tank to flow over!
If any of the above items is found to not be okay, then contact the dealer or manufacturer before taking
action!
5.4 Weekly maintenance items
Do not forget to also carry out the daily inspection in combination with these items!
●
Lubricate all lubrication points.
●
If present: Drain all liquid from the air brake system through the air tank.