Pediatric Car Seat CHURCHiLL 2000CS15-D, Инструкция по эксплуатации

Страница: 14 / 49

Page 38
Installation of Occupant with Hip Strap
NOTE: The Hip Strap is
designed to help prevent
slouching of the occupant.
NOTE: The base is shipped
with the Hip Strap (Page 11)
already attached. See Pages
38 and 39 for installation
steps if it is ever removed.
1. First loosen (Figure A), then
unfasten each buckle and lay
both ends of the Hip Strap
toward the front of the re-
straint (Figure B).
2. Place the occupant in the
restraint (Figure C).
3. Grasp one of the straps and
fasten it to its correspond-
ing buckle (Figure D).
A
B
C
D
B
Page 15
Installation of Restraint, Continued
7. Repeat Steps 5 and
6 for the other side
of the Support Har-
ness.
NOTE: Verify that
both sides of the
Support Harness
are completely
extended.
8. Lay the Support
Harness over the
vehicle head rest. If
a head rest is not
present, simply lay it
behind the vehicle
seat back (Figures A
and B).
NOTE: When per-
forming Step 9, if
the snap hook does
not reach the vehi-
cle’s tether anchor,
attach the tether ex-
tension assembly ac-
cording to the Steps
on Pages 18 and 19.
9. Attach the top
tether snap hook to
the vehicle’s tether
anchor (Figure C).
Snap Hook
Spacer
Bar
A
C