Original User Guide | Pedelec Groove Next
EN-31
5.3.1 Switching on the Pedelec
The Pedelec can only be switched on if a sufficiently charged
battery has been inserted.
DANGER
Only ride the Pedelec when you can safely reach the brakes
3.12 Braking Page EN-23
. You must activate the brakes to stop the
cycle quickly in a dangerous situation. The maximum brake force is
greater than the propulsion force possible. This means stopping is
guaranteed at all times by pressing the brakes. Note that the Pedelec
Groove Next does not switch off automatically after braking. Switch
the drive system to idle after braking.
1. Press the button on the display element briefly. The Pedelec Groove
Next will start. The LEDs on the display element will light in blue and
display the battery charge level
5.3.3 Display of the battery charge
level Page EN-31.
2. Press the button briefly to see which support mode was last used
5.3.4 Display of the assistance mode Page EN-31
. To change modes,
press the button within three seconds. Otherwise, the LEDs lit in
blue will return to the battery charge level.
3. You will receive support for the selected support mode once you step
on the pedals.
5.3.2 Switching off the Pedelec
1. Press the button on the display element for one second.
The Pedelec Groove Next will switch off.
If the Pedelec remains stationary for about 10 minutes, it
switches off itself.
5.3.3 Display of the battery charge level
Display
Description
Battery charge level
Four LEDs light up
76 – 100 %
Three LEDs light up
51 – 75 %
Two LEDs light up
26 – 50 %
One LED lights up
11 – 25 %
One LED flashes
0 – 10 %
5.3.4 Display of the assistance mode
1. To change the support mode, press the
button briefly.
2. Keep pressing the button until the desired support mode is
displayed.
