Pg. 6
Pg. 7
5. The stem is already aligned and installed on the bicycle. Remove
the front plate of the stem to install the handlebars by removing the 2
bolts.
Place the center of the handlebars that are marked with grooves into
the stem and re-install the 2 bolts on the stem front plate.
Position the handlebars to your personal preference and securely
tighten the 2 bolts on the front stem plate. Make sure that, when
tightening, there is even spacing between the top and bottom bolts to
ensure maximum stability.
If need be, the handlebars can be adjusted for height and alignment by
removing the rubber protective cap and loosening the screw (with the allen
wrench included in the tool kit) on top of the stem. Make sure handlebars are
aligned with the front wheel before tightening.
For Comfort Cruiser
