Peco X20 Convertible Trailer Vac, Руководство оператора

Страница: 7 / 46

7
Remove all parts from trailer pan as shown in Figure G.
Cut and remove the (2) retaining wires from the trailer
pan. Refer to Figure B.
Remove the (2) shipping screws from the front trailer
pan as shown in Figure A.
Removing Trailer Pan
Remove (2)
Shipping Screws
Cut (2)
Retaining Wire
Figure G
Figure A
Figure B
Lift the trailer pan off of the chassis and set the trailer
pan upside down as shown in Figure D.
Wooden Support Removal
Using a hammer or pry bar, carefully remove the wooden
supports from the shipping crate. The support consists of
(3) pieces. (2) support legs and (1) top support. Refer to
Figure A.
Using a hammer or pry bar, carefully loosen the top
support and remaining support leg. Refer to Figure B.
Set Trailer Pan
Upside Down
In Preparation
Loosen
Support Leg
Figure D
Figure A
Loosen
Support Top
Figure B