Peco Pro 12 DFS 49621204, Руководство оператора

Страница: 20 / 34

20
Position the Weight Bracket Base and the Weight Bracket Clamp assembly along the caster tubing to prevent
interference from caster forks or any other objects. Tighten the fasteners in an 'X’ pattern until assembly is firmly
clamped to caster tubing. Do not over tighten which may result in bending Weight Bracket Clamps (Item#3).
Weight Kit Installation / Left Caster
NOTE: This Assembly Installation is intended for the Left Caster of the mower.
Align the (4) holes of the Weight Bracket Clamp (Item#2) to the holes in the Quad Weight Bracket Base (Item#1).
Loosely fasten the Weight Bracket Clamp (Item#2) to the Weight Bracket Base (Item#1) using (4) 5/16"-18 x 3" Bolts
(Item#4) & (4) 5/16"-18 Ny-Flange Lock Nuts (Item#5).
Position the Quad Weight Bracket Base (Item#1) under the caster tubing w/ opening towards caster fork. Next,
position the Weight Bracket Clamp (Item#2) on top of caster tubing w/ opening towards caster fork.
To Install the Weights, insert (2) Weights (Item#3) Into the Weight Bracket Base (Item#2) & align the holes of the
Weights w/ the holes of the Weight Bracket Base (Item#2). Fasten the Weights (Item#1) to the Weight Bracket Base
Using (1) Clevis Pin (Item#6) & (1) Hair Pin Clip (Item#7) per weight. Repeat for additional Weights.
Refer to the Figure Below.
Figure A