Peco 23651201, Руководство оператора, Страница: 20 / 44

20
First, loosely secure the Boot Plate (Item #2) to the Aluminum Boot (Item #1) using (2) 3/8”-16 x 1” Carriage Bolts
(Item #3) and (2) 3/8”-16 Ny-Flange Lock Nuts (Item #4). Insert the Carriage Bolts from the inside of the Boot so the
threads are on the top of the Boot. This will prevent grass clippings from collecting on the threads. Refer to Figure B.
Boot Kit Installation (Continued)
Figure B
Figure C
(#1) Rotate Boot 45°
(#2) Align Boot to the
Discharge edge
(#3) Secure Boot Plate
Next, position the Boot Plate to the deck edge rotated at 45° (#1) (refer to Figure C) aligning the Boot Plate to the
deck’s discharge chute mount bracket (#2) . Secure the Boot Plate (#3) to the mower’s discharge chute mount bracket
by using (1) Boot Rod (Item #3) and (1) Hair Pin Clip (Item #4). Refer to Figure C.
With the Carriage Bolts still loose, adjust the position of the boot so that there is no gap between the mower’s
discharge edge and the Boot. Once the boot is correctly positioned, tighten all hardware.
Discharge edge