15
Specifications
Features and specifications subject to change without notice.
Peavey Electronics Corporation • 5022 Hartley Peavey Drive • Meridian, MS • 39305
(601) 483-5365 • FAX (601) 486-1278 • www.peavey.com • EX000139 • ©2011
INPUT SENSITIVITY:
Mic In to full power at the power amp. Master Volume Nom.
Full Nominal
-40 dBu
-22 dBu
Line In to full power at the power amp. Master Volume Nom.
Full Nominal
-10 dBu
+8 dBu
CHANNEL EQ:
Shelving EQ
Low EQ
80 Hz
±15 dB
Mid-Morph
Low
250 Hz
±15 dB
High
4 kHz
±15 dB
High EQ
12 kHz
±15 dB
CLIP LED:
Clip LEDs come on 3 dB before clipping.
FREQUENCY RESPONSE:
All controls nominal (detent)
Mic to Main 20 Hz – 20 kHz +0, -1 dB
Line to Main 20 Hz – 30 kHz +0, -1 dB
Mic to Amp 50 Hz – 20 kHz +0, -3 dB
Line to Amp 40 Hz – 20 kHz +0, -3 dB
PHANTOM POWER:
+48 VOLTS
NOISE:
Main = Main line output, 22 – 22 kHz filter
Amp 1 = Amplifier output, loaded at 4 Ohms, through AP
AUX-0025 switching amplifier filter
All controls full down.
Main
<-
95 dBu
Amp 1
<-
60 dBu
Master Volume nominal
Main
<-
88 dBu
Amp 1
<-
55 dBu
THD:
All controls nominal
<
0.01% @ main line output, -30 dBu in mic input Channel 1
<
0.5% @ amp 1 @ 400 Watts into 4 Ohms
All controls nominal
<
0.005% @ main line output, +4 dBu in line input Channel 1
<
0.5% @ amp 1 @ 400 Watts into 4 Ohms
MASTER EQ:
80Hz
±12 dB
250Hz
±12 dB
500Hz
±12 dB
1kHz
±12 dB
2kHz
±12 dB
4kHz
±12 dB
10kHz
±12 dB
METER ARRAY:
LIMIT
-6 dB
-12 dB
-18 dB
-24 dB
-30 dB
AMP LIMITER:
Limits amplifier power just before clipping. The limiter holds the amp power
without clipping and can be driven up to 18 dB past maximum output.
AMPLIFIER OUTPUT POWER:
120VAC
Both channels loaded at 8 ohms: 280 Watts RMS per ch
Both channels loaded at 4 ohms: 500 Watts RMS per ch
POWER REQUIREMENTS:
Domestic:
120VAC 50/60Hz
200 Watts Nominal
Export:
230VAC 50/60Hz
200 Watts Nominal
SIZE:
Dimensions:
H x W x D
7.75" x 15.5" x 9.375"
19.69cm x 39.37cm x 23.81cm
WEIGHT:
13 lbs.
5.9 kgs