manualshive.com logo in svg

Peavey PVX p 10, Руководство пользователя

Поделиться
Скачать
Peavey PVX p 10 Скачать руководство пользователя страница 39

Loudspeaker System Specifications 

37 

 

Fig. 60 

 
If you push in the "Push for DSP" knob now, the unit will restore to Factory 
Defaults, and any custom set-up will be lost and have to be re-entered. 

In order to assure proper operation, we recommend that the speaker 
system be turned OFF, and turned back on again before using it or re-
loading any previously desired settings. 

All previously loaded gain settings, Presets, Channel EQ choices, filter settings, 
etc., will need to be re-loaded into the speaker system after a Factory Reset 
event. 
 
Normally, each time a change is made to the speaker system, whether it is the 
Preset used, or the Location, or the Bluetooth® system, it will be saved, and on 
powering the speaker system back ON, those settings will automatically come 
back up.  Using the Restore function can be helpful if someone has altered the 
settings such that the speaker system will not function normally, or the files have 
become corrupted due to a power spike, a brown-out, etc. 
 
 

TROUBLESHOOTING 

 

No Output at All 

First, make sure the unit has AC power and is turned ON.  Make sure the  LED 
on the power amp module is illuminated.  
 
If not, make certain the ON/OFF switch (3) is in the ON position and check the 
IEC power cord connection (2) by ensuring it is fully engaged and seated. Make 
certain the AC line cord is plugged into a working AC outlet. 
Finally, check the fuse (1). (See the Rear Panel: Fuse section, for safety 
instructions.) 
 
Once assured your unit is getting AC power, check that the 

PVX™p 10 

Bluetooth®  is getting a signal. Temporarily disconnect the cable running to its 
inputs and connect it to some other device capable of reproducing the signal (i.e., 
a power amp and speaker). If this produces a signal, make sure that all Level 
controls being used have been turned up to a satisfactory level (one-third to 
halfway). 
 

Содержание PVX p 10














































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды