Peavey PC1600X Скачать руководство пользователя страница 46

Страница: 46 / 66

Peavey PC1600X User Manual (rev-h)

Appendix A

------------------------------------------------------------------------------

PC1600x System Exclusive Messages

Recall Preset:

F0 00 00 IB OB ch 00 pp F7

When this is received the PC1600x will switch to the preset specified by “pp” regardless of the current MIDI
mapping.

Send/Recv All presets:

FO 00 00 IB OB ch 01 {data} F7

This message is sent and received by the PC1600x. It contains all preset data including the current edit
buffer.

Send/Recv All scenes:

F0 00 00 IB OB ch 02 {data} F7

This message is sent and received by the PC1600x. It contains all scene data.

Send/Recv All globals:

FO 00 00 IB OB ch 03 {data} F7

This message is sent and received by the PC1600x. It contains all MIDI maps and all other global variables.

Send/Recv Current edit buffer:

F0 00 00 IB OB ch 04 {data} F7

This message is sent and received by the PC1600x. It contains only the current edit buffer. This combined
with the Recall preset SysEx command will allow any preset to be obtained from an outside source.

Request everything:

FO 00 00 IB OB ch 10 F7

The PC1600x will respond to this message with:
Send/Recv All presets
Send/Recv All scenes
Send/Recv All globals

Request All presets:

F0 00 00 1B 0B ch 11 F7

The PC1600x will respond to this message with: Send/Recv ALL presets

Request ALL scenes:

FO 00 00 IB OB ch 12 F7

The PC1600x will respond to this message with:

Send/Recv All scenes

Request All Globals:

F0 00 00 IB OB ch 13 F7

The PC1600x will respond to this message with:

Send/Recv All Globals

Request edit buffer:

F0 00 00 IB OB ch 14 F7

The PC1600x will respond to this message with:

Send/Recv Current edit buffer

Write edit buffer :

F0 00 00 IB OB ch 20 DD F7

When the PC1600x receives this message, it saves the current edit buffer to the preset specified by pp.

Содержание PC1600X



































































Результаты поиска

Содержание PC1600X

Отзывы:

Похожие инструкции для PC1600X

Бренды по названию

Популярные бренды

Peavey PC1600X, Руководство пользователя

Результаты поиска

Содержание PC1600X

Отзывы:

Похожие инструкции для PC1600X

Бренды по названию

Популярные бренды